Maqueen Plus Car Program Link: https://makecode.microbit.org/_evzJtbUqoLFt
Download the corresponding programs to the micro:bit on the handle side and the microbit
motherboard on the car side respectively. Turn on the power of the handle and the car. Gently
push the joystick forward, Maqueen Plus will gradually start and speed up. Try turning around
and going backward. The speed in each direction is related to the angle of the joystick. You can
not only control the direction of the car, but also the speed of the car.
7. Link-tracking Sensor Calibration
To Next Page
