Applicable EMC Standards: EN 61326-1 (Class A), EN 55011 (Class A, Group 1)
This product is a Class A device.
It may generate radio wave interference when used in a residential environment. In this situation, the user may be
required to implement appropriate countermeasures.
This product is a Group 1 device.
Radio frequency energies in the form of electromagnetic radiation, induction, and/or electrostatic bonding are not
used nor deliberately emitted when processing material or during examination/analysis.
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product’s performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The contents of this operation manual and the specications of this product are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you nd any misprint
or error, please inform Roland DG Corporation.
• DGSHAPE Corporation assumes no responsibility for any direct or indirect loss or damage which may occur through
use of this product, regardless of any failure to perform on the part of this product.
• DGSHAPE Corporation assumes no responsibility for any direct or indirect loss or damage which may occur with
respect to any article made using this product.
Company names and product names are trademarks or registered trademarks of their respective holders.
http://www.dgshape.com/ Copyright © 2018 DGSHAPE Corporation
To Next Page
Loading...
