Need help?Do you have a question about the DHC BT2010 and is the answer not in the manual?
General| Brand | DHC |
|---|---|
| Model | BT2010 |
| Category | Measuring Instruments |
| Language | English |
General operating conditions and model compatibility for the battery tester.
Critical safety information for using the battery tester and handling batteries.
Specific safety measures for the user during battery testing operations.
Steps to ensure the battery testing environment and equipment are ready.
Instructions for correctly connecting the lead wires to the battery tester.
Essential checks and setup requirements before initiating battery tests.
Steps to select test type, battery rating, and input battery capacity.
Procedures for performing the test and understanding various test outcomes.
Steps to select battery type, rating, and input battery capacity for regular batteries.
Procedures for performing the test and understanding various test outcomes.
Steps to start the system test and analyze cranking voltage results.
Assessing charging system performance at idle with diagnostic steps.
Assessing charging system performance with accessory loads.
Understanding and resolving common error messages like 'LOAD ERROR'.
Procedure for printing 24V system test results.
How to use and interpret the 'Test Code' for data retrieval.
Steps to select and change the display language of the tester.
Procedure to adjust the current date and time settings on the tester.
How to adjust the brightness level of the tester's display.
To Next Page
