DHK Hobby Wolf - Detailed Parts Inventory; Transmitter, Receiver, and Chargers; Chassis and Deck Structures; Wheels, Tires, and Bodies

The following parts are suitable for cars only
where there are √
Optional parts
8131-012 Side guard (left/right) & aluminium chassis
D302HT 2.4GHz LCD transmitter
Part#
Desc
8131-9S1
8381-9S2
8381-9S3
8381-9Z0
8381-9Z1
8131-9M1
8131-001
8131-002
8131-003
8131-004
8131-005
8131-006
8131-007
8131-008
8133-002
8382-005
8381-008
8381-009
8381-010
8381-011
8381-012
8381-014
8381-015
H111
H112
H113
D302T
D302S
H125
Servo mount
Servo arm (2 pcs)
B head screw(BM3*6mm) (16 pcs)
Assembly of steering tie rod
Steering tie rod (2 pcs)
Motor mount
Chassis
Upper deck mount-F/R
Central drive shaft-E
Battery mount-A/B
Receiver cover-upper/lower
Upper deck-F
Upper deck-G
Wire mount (2 pcs)
7.2V NiMh battery charger 8.5V 500mAh output,
100-240V input (Raz-R & Wolf, Version A)
Central drive shaft-C
Antenna tube (3pcs)
Pin-B(dia 1.2mm) (16 pcs)
Screw washer(4 pcs)
Flathead screw(KM3X10mm) (16 pcs)
Flathead screw-coarse thread
(KB3*10mm) (16 pcs)
Flathead screw (KM3*5mm) (16 pcs)
Flathead screw(KM3X18mm) (16 pcs)
Brushed ESC 45A (Raz-R & Wolf, Version A)
Brushed motor 550
7.2V SC 1800mAh NiMh battery (Raz-R & Wolf,
Version A)
2.4GHz transmitter
2.4GHz receiver
8.4V/SC/1800mAh battery (Raz-R, Version B)
H126 High voltage ESC (Raz-R, Version B)
7-cell 8.4V NiMh battery charger-T connector
(Raz-R, Version B)
8133
8134
8131-9M2
8131-009
8131-010
8131-013
8131-015
8131-016
8131-017
8131-018
8132-001
8132-003
8132-005
8132-006
8133-001
8133-001C
8133-9M1
8134-001
8134-001C
8382-705
D303
D304
Motor gear-18T/Lock nut
(M3*3), zinc alloy
Body post-F/R
Rear tires (for buggy 8133)
(2 pcs/set)
Front tires (for buggy 8133)
(2 pcs/set)
Buggy front wheels (2 pcs)
Buggy front tires
(with foams)-unglued (2 sets)
Buggy rear wheels (2 pcs)
Buggy rear tires
(with foams)-unglued (2 sets)
Truggy tires
Body post holder/body post
Truggy wheels (2 pcs)
Truggy tires
(with foams)-unglued (2 sets)
Buggy painted body
(for 8133) (PVC body)
Clear buggy body (PVC, with
window cutout and body decals
Motor gear-21T/Lock nut(M3*
3), bronze
Truggy painted body (for 8134)
(PVC body)
Clear truggy body (PVC, with
window cutout and body decals
B head screw(BM3*24mm)
(16 pcs)
Servo (6kg ) (for 8134)
Servo (3kg ) (for 8133)
H126
H131
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√