Diamond Tech
Diamond Max Series 6 Year Warranty
All Diamond Tech grinders and accessories are manufactured to high quality standards and are serviced by highly
qualied technicians.
Diamond Max Grinders are warranted to the original purchaser for six full years from the original purchase date. During
the six year period, if you feel the Diamond Max Grinder is not performing properly and needs to be serviced, contact
Diamond Tech at 800-937-9593 or email info@dticrafts.com for a Return Authorization Number. Equipment will not be
accepted at Diamond Tech without a Return Authorization Number.
If returning your grinder for evaluation or repair, be sure to include your Name, Address, Daytime Phone Number with
Area Code and a letter explaining the specic problem you are encountering. You will be contacted if any necessary parts
or service are not covered under the warranty.
Date of purchase ___ / ___ / ___
Mark the Return Authorization Number clearly on every package! Do not send this product back without such prior
authorization! Return postage and insurance are the responsibility of the consumer. Diamond Tech will return your grinder
postage paid and insured if it is under warranty. Any grinder no longer under warranty will be returned at the owner’s
expense. Diamond Tech reserves the right to repair or replace faulty equipment at its discretion. The Diamond Max
Grinder is warranted against defective materials or workmanship. If the Diamond Max Grinder suffers damage due to
customer modications and/or is used for any application other than that for which it was designed, this warranty is void.
This warranty does not include damage due to: (A) neglect (B) accident (C) unreasonable use (D) improper maintenance
(E) any other causes not attributed to defects in material or workmanship. This warranty specically excludes the Diamond
Max Grinder bits or disks. Any implied or otherwise explicit guarantees made through merchandiser of this product are not
covered in this warranty coverage agreement and are expressly disclaimed.
IMPORTANT NOTE: This machine was designed for certain applications only. Diamond Tech strongly recommends that
this machine NOT be modied and/or used for any application other than that for which it was designed. If you have any
questions relative to its application, please contact us and we will advise as to it proper use.
Additional Parts and Accessories
Item Item Number
WORK SURFACE GRID 289
UNIVERSAL FACE SHIELD 75
STEP-UP WORK SURFACE 72
EASY-ON FOOTSWITCH 42
MAX SPLASH GUARD P203
GRINDER MOTOR 110V/220V P216/P216A
GRINDER CAPACITOR 110V/220V P221/P221A
GRINDER DISK COLLAR WITH RETAINING NUT P218
SLIDE VALVE P201
SUPER SPONGE REPLACEMENTS 66SUPER
1/4” FAST BIT 23
1/4” STANDARD BIT 60
3/4” FAST BIT 36
3/4” STANDARD BIT 35
1” FAST BIT 29
1” STANDARD BIT 41
ANGLED BIT 30
REDUCING BIT 31
180 GRIT DISK 57
260 GRIT DISK 56
360 GRIT DISK 32
10/2018
5600 Airport Blvd, Suite C, Tampa, Florida 33634
(U.S.A., Canada) 813-806-2923
Fax: 813-806-1988 • Email: info@dticrafts.com
www.DiamondTechCrafts.com
To Previous Page
Loading...