2
FOREWORD
This manual has been drawn up to provide the customer with all information regarding the
machine and the Standards connected to the same, as well as the use and maintenance
instructions that allow the object to be used in the best way possible, maintaining its
efficiency through time.
This manual must be given to persons appointed to using the machine and its periodical
maintenance.
INDEX
CHAP. 1 – INFORMATION REGARDING THE MACHINE page 4
1.1 - GENERAL PRECAUTIONS
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
1.2.1 - mechanical safety devices
1.2.2 - electrical safety devices
1.3 - DESCRIPTION OF THE MACHINE
1.3.1 - general description
1.3.2 - construction features
1.3.3 - composition of the machine
CHAP. 2 – TECHNICAL SPECIFICATIONS page 6
2.1 - CLEARANCE, WEIGHT, FEATURES ...
CHAP. 3 – RECEIPT OF THE MACHINE page 7
3.1 - SHIPPING THE MACHINE
3.2 - CHECKING THE PACKAGING ON RECEIPT
3.3 - DISPOSING OF THE PACKAGING
CHAP. 4 - INSTALLATION page 8
4.1 - POSITIONING THE MACHINE
4.2 - ELECTRIC CONNECTION
4.3 - WIRING DIAGRAM
4.3.1 - single-phase wiring diagram
4.4 - CONTROLLING OPERATION
CHAP. 5 – USING THE MACHINE page 9
5.1 - COMMANDS
5.2 - LOADING THE PRODUCT
5.3 - SHARPENING THE CUTTERS
CHAP. 6 – ROUTINE CLEANING page 11
6.1 - GENERALITIES
6.2 - MACHINE CLEANING PROCEDURE
6.2.1 - cleaning the lid, cutter and tank
6.2.2 - general cleaning
3
CHAP. 7 - MAINTENANCE page 11
7.1 - GENERALITIES
7.2 - FEET
7.3 - POWER SUPPLY CABLE
7.4 - CUTTERS
CHAP. 8 - DISMANTLING page 12
8.1 - PUTTING OUT OF SERVICE
8.2 - WEEE Waste Electrical and Electronic Equipment
To Next Page
Loading...