EasyManua.ls Logo

diapath Giotto - Page 19

diapath Giotto
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
2.2 Instrument rear part
Instrument rear part – Picture 39
1. Input power supply
2. Input running water
3. Liquids drain point
4. Discharge of fumes and vapours regarding staining reservoirs
Picture 39 - Instrument rear part
2.3 Instrument features
Automatic stainer for H&E, Papanicolau and special simultaneous staining
High productivity (max 12 slide holders simultaneously)
STAIN ID technology, technology that allows automatic identification of handles and specific procedures related to them
S
3
- Simultaneous Staining Scheduler, new software that generates the best possible configuration between the 40
workstations present inside the instrument, in accordance with laboratory procedures
Automatic scanning of reagents level, automatic detection system that allows an adequate level of reagents and staining to
be maintained.
High efficiency noiseless robotic arm that allows fast, accurate movements; before the movement to the next reagent, it
emulates manual dripping movement by placing the rack into inner reservoir sides. This procedure protects the level of the
reagents and guarantees a more accurate cleaning of staining reservoirs, it also limits cross-contamination
Smart LED System, acoustic and visual warning about the status of the system
Water Pressure System is a sensor that informs the operator of the possible absence of water flow into the water system
The notice allows the user to intervene in time, in order to avoid the lack of differentiation of hematoxylin into running water
Unlimited number of memorable staining procedures
4 loading stations (drawer IN)
4 unloading stations (drawer OUT)
Continuous loading, management and opening of reagent drawer and IN/OUT drawers through software in order to avoid user
exposure to harmful vapours
From 2 to 4 washing stations (customizable)
From 26 to 28 reagent stations (customizable)
Alarm for exhausted reagent replacement trough reagent management system
Only one cap for the reservoirs surface that allows reagent reservoirs to be covered and uncovered with a single gesture.
Colour touchscreen monitor
Easy-to-use, Italian and English user interface
Graphic representation regarding the state of the procedures
Activated charcoal filter and fumes conveyor for external connection
Emergency head
WARNING
In order to avoid damages to the instrument or to the specimens, Diapath S.p.A. recommends to use only original spare