diapath Giotto - Page 9

9
Safety training
All the operators must be trained to use Giotto automatic stainer safely.
After such training the operators must have understood that:
• The instrument must be connected to a voltage source in accordance with electrical data label
• An instrument use different from Diapath S.p.A. instructions might compromise its functioning and the safety of the
operator
User groups
Giotto automatic stainer must be used only by qualified and well-trained operators.
All users can proceed with the use of the automatic stainer only after reading this user manual and when all technical details are
familiar to them.
Compliance with safety rules
All regulations related to safety, local codes and instructions present in the manual or on the equipment must be carefully observed to
ensure personal safety and to prevent damages to both the automatic stainer and to equipment connected to it. If the equipment is
used incorrectly, the protection provided might be compromised
Definition of adopted symbols
Read carefully the manual before the
instrument starting
In vitro diagnostic use
Manufacturer
Built
in
Danger
Disposal
European Community apporval
mark
Electrical shocks risk
See the user manual
Important information for the user
Diapath innovation