3.5 Midi Connections
3.5.1 Midi In
Midi in receives “program change” orders from commonly available midi pedals
and control systems.
The VH4 is able to supply phantom power to your midi pedal via a 5-prong DIN
midi
cable.
Pin 1 and 6 = minus
Pin 3 and 7 = plus
Pin 4 and 5 = midi data
The voltage is 12VDC which is acceptable for 98% of all midi pedals.
Maximum power usage of the pedal can not exceed 800mA
3.5.2 Midi Through
This jack routes the midi signal to other midi partners. Midi data not addressed
to the VH4 get looped through this jack.
See chapter 6 for midi programming instructions
To Next Page
Loading...
