Digi-Code 5010 User Manual

For remote installation the receiver may be mounted near the operator head on a joist or
the ceiling by using the mounting tab. Order Model 5192-06 adapter, which permits
connection between the operator terminal and the two-way lugs on the receiver.
Slip on connectors at one end of the adapter connect to the flat side of each spade lug on
the receiver, and the spade connectors at the other end connect to the operator terminal.

Digi-Code 5010 Specifications

General

Brand	Digi-Code
Model	5010
Category	Garage Door Opener
Language	English