Digi-Pas DWL3000XY User Manual

© 2015 DIGIPAS USA LLC. All Rights Reserved.
SYNC Menu Screen Display and Button Function
SYNC Menu Setting
The status bar indicates current selected mode as USB. To
change to Bluetooth mode, scroll the 'right' button and then
press MODE button.
Reboot the device by turning off the device and then turn on
the device again to activate the new setting.
Once Bluetooth mode is activated, the icon will display on
the single and dual-axis mode screen display.
BACK TO MAIN MENU
MOVE TO RIGHT
SELECT / ENTER
MOVE TO LEFT
SYNC via
USB
SYNC via
Bluetooth
Cursor
Status: USB Active
Current Status

Digi-Pas DWL3000XY Specifications

General

Brand	Digi-Pas
Model	DWL3000XY
Category	Laser Level
Language	English