SM – 5100 Operation Manual
43
digits, which depends on the selected Barcode
type.
Enter item code.(Ex.10010)
No appended item code of PLU 100.
Select EAN ADD-ON or EAN ADD-
OFF.(Ex. EAN ADD-OFF)
Set the Main Group number.(default MG
997)
Enter Main Group No.(Ex.111)
Link PLU 100 to Main Group 111.
Press [<<] or [>>] key to change whether
print sell-by-date.
(Ex. Print sell by date)
Set sell-by-date.(Ex.3 days)
3 digits can be set.(0~999)
Press [<<] or [>>] key to change whether
print sell-by-time.
(Ex. No print sell by time)
Press [<<] or [>>] key to change whether
print used by date.
(Ex. No print used by date)
Set used-by-date,
used-by-time
Setting way of used-by-date, used-by-time are
same as setting sell-by-date and sell-by-time.
Press [<<] or [>>] key to change whether
print packed date.
If necessarily, packed date can set the day
after present date.
(Ex. 1 day after present day)
Press [<<] or [>>] key to change whether
print packed time.
To Next Page
Loading...
