Digi SM-5100 - Page 52

SM – 5100 Operation Manual
52
4.6.5 Volume Discount & Mark Down print function
Volume Discount function is used to set up special price during a sales period. Shop manager
may program the discount price during a sales period, and the Shop manager can avoid sales loss
caused by not returning the discount price back to the original price even after the sales period.
Type of Volume Discount
Shop manager can select a discount type from 5 types of volume discount. The formulas of 5
discount type are shown in the following table.
Formula of Discount price
Discount Type
Formula
Example
Free Item
 To called up PLU
with 0 Unit Price and
allow issuing a receipt
or label, SPEC 231
must set to "ALLOW"
in advance.
Price = 0
Total Price = 0
Unit Price Discount
 To select Formula (1)
or Formula (2) can be
decided by SPEC 124
Setting.
(1) Unit Price = Original Unit Price
- Unit Price discount amount.
(2) Unit Price = Unit Price discount
amount.
Original Unit Price = $ 10.00
Unit Price discount amount = $2.00
(1) Unit Price = $10.00 - $2.00 = $8.00
(2) Unit Price = $2.00
Unit Price % Discount
Unit Price = Original Unit Price x
(100% - % Discount)
Original Unit Price = $ 10.00
% Discount = 20%
Unit Price = $10.00 x (100% - 20%) =
$8.00
Total Price Discount
Total Price = Original Price - Price
Discount Amount
Original Total Price = $10.00
Price Discount Amount = $2.00
Total Price = $10.00 - $2.00 = $8.00
Total Price % Discount
Total Price = Original Total Price x
(100% - % Discount)
Original Total Price = $10.00
% Discount = 20%
Total Price = $10.00 x (100% - 20%) =
$8.00