Digi SM-5100 - Page 55

SM – 5100 Operation Manual
55
4.7 Memory Status
The function is used for checking the number of existing PLU and remaining programmable
PLU.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[2][0]
S20
→
MEMORY
STATUS
Select memory status check
mode.
You can press [︽] or [︾] key to
select this mode.
[*]
S20.0
PLU
P 7
LF 4544
[T]
S20
→
MEMORY
STATUS
Back to S mode.
4.8 Key Assignment
The Preset keys can be used for assignment of PLUs and Function keys to speed up the operation in
R mode.
4.8.1 PLU Assignment
PLU Number can be assigned to a preset key to call up PLU data by pressing the assigned preset
key on Registration Mode.
For example: Assign PLU Number 100 to Preset Key Number 1.
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[4] or [ ︾ ] three
times
S4
→
KEY
ASSIGNMENT
Key Assignment mode is MENU
4 in S mode.
[*]
S4.0
PS AS
0
NO SET
Enter PLU assignment mode.
[1][0][0]
S4.0
PS AS
100
NO SET
Enter PLU No.100