Digi TransPort LR54 - Show Location Information

Services and applications Location information
Digi TransPort WR Routers User Guide
149
8. Save the configuration:
digi.router> save config
Configure the Vehicle ID
You can configure the TransPort device to include a vehicle ID with location messages.
Required configuration items
n A four-digit alphanumeric string for the vehicle ID. The default is 0000.
To set the vehicle ID:
Web
1. On the menu, click System > Configuration > Location > Settings.
2. For Vehicle ID, enter the vehicle ID.
3. Click Apply.
Command line
1. Set the ID. Allowed value is a four digit alphanumerical string (for example, 01A3 or 1234). If no
vehicle ID is configured, this setting defaults to 0000.
digi.router> location vehicle-id 1234
2. Save the configuration:
digi.router> save config
Show location information
You can view status, configuration, and statistics about location information from either the WebUI or
the command line.
Web
1. On the menu, click System > Configuration > Location > Settings.
Command line
Show basic configuration information
To show detailed location information and statistics, use the show location command:
digi.router> show location
Location Status
---------------
GNSS State : on
Source : 192.168.2.3
Latitude : 40* 49' 20.000" N (40.822245)
Longitude : 73* 12' 32.000" E (-73.209048)