Virtual Private Networks (VPN) OpenVPN
Digi TransPort WR Routers User Guide
217
3. Save the configuration on the OpenVPN client and/or server.
digi.router> save config
Show OpenVPN server status and statistics
You can view status and statistics for OpenVPN servers from either the web interface or the
command line:
Web
n On the menu, click Network > Networks > OpenVPN > Server.
Command line
Enter the show openvpn-server command. For example:
digi.router> show openvpn-server
OpenVPN Server Status
---------------------
Description : VPN server for remote employees
Admin Status : Up
Oper Status : Up
Interface : ovpns
IP Address : 10.8.0.1
Mask : 255.255.255.0
MTU : 1500
Received Sent
-------- ----
Interface Packets : 4 4
Interface Bytes : 288 288
Connected Client Real Address Virtual Address Bytes Received Bytes
Sent Connected Since
-----------------------------------------------------------------------------------------------------------------
-----------------------------
client 203.0.113.3 10.8.0.2 23550
4189 Thu Aug 3 17:12:21 2017
digi.router>
Show OpenVPN client status and statistics
You can view status and statistics for OpenVPN clients from either web interface or the command line:
Web
1. On the menu, click Network > Networks > OpenVPN > Client.
2. Select the appropriate OpenVPN client.
Command line
Display all enabled OpenVPN clients
The show openvpn-client command displays a summary of the OpenVPN clients configured on the
device.
digi.router> show openvpn-client
# Status Remote Server IP Address Mask Description
--------------------------------------------------------------------------------
----------------------
To Next Page
Loading...
