Digi TransPort LR54 - Example: Openvpn Tunnel in Bridging Mode Using Certificate Authentication

Virtual Private Networks (VPN) OpenVPN
Digi TransPort WR Routers User Guide
220
OpenVPN client configuration
openvpn-client 1 state on
openvpn-client 1 server 212.87.112.1
openvpn-client 1 protocol tcp
openvpn-client 1 cipher aes-128-cbc
openvpn-client 1 digest sha1
openvpn-client 1 ca ca.crt
openvpn-client 1 username client1
openvpn-client 1 password 12345678
Example: OpenVPN tunnel in bridging mode using certificate
authentication
The following figure shows a sample OpenVPN tunnel in bridging mode using certificate
authentication:
The configuration settings for the OpenVPN client and server are as follows:
OpenVPN server configuration
openvpn-server state on
openvpn-server bridge-mode lan1
openvpn-server protocol udp
openvpn-server cipher aes-256-gcm
openvpn-server auth-by certificate
openvpn-server ca ca_cert.pem
openvpn-server cert ovpns.crt
openvpn-server key ovpns.key
openvpn-server dh ovpns-dh.pem
OpenVPN client configuration
openvpn-client 1 state on
openvpn-client 1 server 212.87.112.1
openvpn-client 1 bridge-mode lan1
openvpn-client 1 protocol udp
openvpn-client 1 cipher aes-256-gcm
openvpn-client 1 ca ca.crt
openvpn-client 1 cert client1.crt
openvpn-client 1 key client1.key