Digi TransPort LR54 - Reset the Device to Factory Defaults

System settings Reset the device to factory defaults
Digi TransPort WR Routers User Guide
246
Reset the device to factory defaults
Resetting the device to factory defaults performs the following actions:
n Clears all configuration settings. When the device boots up again, it uses the configuration in
file config.fac. If the config.fac file has been deleted, the device regenerates the file with the
default Digi configuration.
n Deletes all user files including Python scripts.
n Regenerates SSH keys.
n Clears event and system log files.
n Creates a new event in the event log indicating a factory reset.
To reset the device to factory defaults:
1. Locate the reset button on your device. For the TransPort LR54, the Reset button is located
beneath the SIM card slot cover on the front panel, to the right of SIMslot 2. Remove the SIM
cover to access the Reset button.
2. Press and hold the Reset button for 5 seconds. The device reboots automatically.
The device reset to factory defaults. Follow the instructions in the TransPort Quick Start Guide
to reconfigure the device.