Digi TransPort LR54 - Display Logs

Diagnostics and troubleshooting Logs
Digi TransPort WR Routers User Guide
264
Display logs
Web
1. On the menu, click System > Administration > Logs.
2. Click Log viewer. See Log viewer page for details on all page fields.
3.
To stream the event log, click  under Event Log. To stream the system log, click  under
System Log. For more information on the controls in the Log Viewer, see Log viewer page.
Command line
To display the event log, use the show log command.
Note If the logs are stored in flash, the show log command displays the logs stored in flash.
For example:
digi.router> show log
2016-06-03 16:54:50.643501 user.notice CLI[admin]: Login by admin.
2016-06-03 16:54:47.245107 user.notice CLI[]: Login failure by .
2016-06-03 16:54:39.831107 user.info cellular_monitor[1245]: module support =
HE910 4G support = 0
2016-06-03 16:54:39.653107 user.info cellular_monitor[1245]: Model = HE910
To display the system log, use the show log system command variant. For example:
digi.router> show log system
2017-01-26 00:22:36.157657 kern.warning kernel:ESW: Link Status Changed - Port2
Link Down
2017-01-26 00:22:36.157263 kern.info kernel:device wifi5g1 entered promiscuous
mode
2017-01-26 00:22:36.157263 kern.info kernel:device wifi1 entered promiscuous mode
2017-01-26 00:22:36.042680 kern.info kernel:lan1: port 3(eth4) entering
forwarding state
2017-01-26 00:22:36.042576 kern.info kernel:lan1: port 3(eth4) entering
forwarding state
2017-01-26 00:22:36.042255 kern.info kernel:device eth4 entered promiscuous mode
2017-01-26 00:22:33.312014 kern.info kernel:lan1: port 2(eth3) entering
forwarding state
2017-01-26 00:22:33.311843 kern.info kernel:lan1: port 2(eth3) entering
forwarding state
2017-01-26 00:22:33.297835 kern.info kernel:device eth3 entered promiscuous mode
digi.router>