Digi TransPort LR54 - Local Networks Page

Web reference Local Networks page
Digi TransPort WR Routers User Guide
310
Local Networks page
Use the Local Networks page to configure and manage local networks. For each local network, you
can configure the following options.
Configuration options
Option Description
Enable Enables or disables the network. The default is disabled.
Interfaces Specifies one or more physical interfaces for the LAN. The default is none.
Description
Specifies a description for the network. Enter a string up to 63 characters long.
IPv4
IP address Specifies the IPv4 address for the network.
Netmask Specifies the netmask for IP address in IPv4 format. The default value is
255.255.255.0.
DHCP server
DHCP server Enables or disables a DHCP server, or enables DHCP relay. Values are:
n Off — Disables all DCHP server functionality.
n Server — Enables the device's DHCP server.
n Relay — Disables the device's DHCP server and enables DHCP relay.
The default is Server.
IP start If Server is selected for DHCP Server, specifies the start IPaddress for the range of
IP addresses the DHCP server issues to clients.
IP end If Server is selected for DHCP Server, specifies the end IP address for the range of
IPaddresses the DHCP server issues to clients.
Lease
expires
If
Server
is selected for
DHCP Server
, specifies the lease length, in minutes, issued
by the DHCP server.
Primary
Relay
Server
If
Relay
is selected for
DHCP Server
, specifies the IP address of the primary relay
server.
Secondary
Relay
Server
(Optional) If
Relay
is selected for
DHCP Server
, specifies the IP address of the
secondary relay server.
IPv6
Enable IPv6 Enables or disables IPv6 addressing. The default is disabled.