Digi TransPort LR54 - New GRE Tunnel Page

Web reference New GRE tunnel page
Digi TransPort WR Routers User Guide
316
New GRE tunnel page
Use the New GRE tunnel page to configure a new GRE tunnel.
Configuration options
Option Description
Select Tunnel
Specifies the number for the tunnel, an integer from 1 to 10. By default, tunnel
numbers are assigned from 1 to 10 and the next available tunnel number is
used.
Enable Enables or disables the GRE tunnel. The default is enabled.
Description
Description for the GRE tunnel. Specify a string value up to 255 characters
long.
IP Address Specifies the IPv4address for the GRE tunnel.
Subnet Mask Specifies the subnet mask for the GRE IP address in IPv4 format.
Peer Specifies the remote peer address for the GRE tunnel in IPv4 format.
Key Specifies the key to use for the GRE tunnel, a 4-byte unsigned integer. Specify
an integer from 0 to 4294967295. The default is no key.
Status display
Option Description
Admin Status Shows the current administrative status: Up or Down.
Oper Status Shows the current operational status: Up or Down.
IP Address Shows the IPaddress for the GRE tunnel.
Subnet Mask
Shows the subnet mask for the GRE IP address.
Peer
Shows the IP address for the GRE peer.
Key Shows the key for the GRE tunnel.
Packets Shows the number of received and sent packets for the GRE tunnel.
Bytes
Shows the number of received and sent bytes for the GRE tunnel.