Command reference gpio-digital
Digi TransPort WR Routers User Guide
378
gpio-digital
Configures the digital IO ports
Syntax
gp
io
-di
git
al
<pa
ra
met
er>
<va
lu
e>
Parameters
mode
Configures the digital IO mode.
Accepted values can be one of input or output. The default value is input.
pullup
Enables or disables the pullup resistor.
Accepted values can be one of off or on. The default value is on.
output-state
Enables or disables the output state.
Accepted values can be one of off or on. The default value is off.
To Next Page
Loading...
