Digi TransPort LR54 - Power

power
Digi TransPort WR Routers User Guide
412
power
Configures device power settings.
Syntax
power <parameter> <value>
Parameters
ignition-on-delay
Power on delay in seconds after ignition sense goes up.
Accepted value is any integer from 0 to 64800. The default value is 0.
ignition-off-delay
Power off delay in seconds after ignition sense goes down.
Accepted value is any integer from 0 to 64800. The default value is 0.
button
Controls powering down via power button. Use Disable Power Down to disable short press (a normal
shutdown) but allow a forced shutdown via a long press of the power button. Use Disable All to disable
the power button completely. In any case, powering up the device using the power button is allowed.
Accepted values can be one of enable-power-down, disable-power-down or disable-all-power-down.
The default value is enable-power-down.