Digi TransPort LR54 - Update

update
Digi TransPort WR Routers User Guide
485
update
Performs system updates, such as firmware updates, and setting the configuration file used at bootup
and when saving configuration. Firmware update options include specifying the device system
firmware or the cellular module firmware to load onto the device.
This command is available to super users only.
Syntax
update firmware <firmware-file>
update module <module number> <firmware-images-path | carrier-name | show>
[force]
update config <configuration-file>
Parameters
firmware
Updates the device system firmware.
module
Updates the cellular module firmware.
config
Sets the configuration filename.
Examples
n
update config config.da1
Set the configuration file to 'config.da1.'
n
update firmware filename
Initiate the device system firmware update process.
n
update module 1
Initiate the cellular module firmware update process. This process retrieves image files from
Digi International site and downloads the images to the module.
n
update module 1 ./module_fw
Initiate the cellular module firmware update process. This process uploads firmware files from
the directory ./module_fw to the cellular module.