wifi-client-network
Digi TransPort WR Routers User Guide
496
wifi-client-network
Configures a Wi-Fi network to join.
Syntax
wifi-client-network <1 - 16> <parameter> <value>
Parameters
ssid
Service Set Identifier (SSID) for the Wi-Fi network to join.
Accepted value is any string up to 32 characters.
security
Security for the Wi-Fi network.
Accepted values can be one of none, wpa2-personal, wpa-wpa2-personal, wpa2-enterprise or wpa-
wpa2-enterprise. The default value is none.
password
Password for the Wi-Fi network. Used for authentication when using wpa-wpa2-personal or wpa2-
personal security.
Accepted value is any string up to 255 characters.
enterprise-username
Username for the Wi-Fi network. Used for authentication when using wpa-wpa2-enterprise or wpa2-
enterprise security.
Accepted value is any string up to 64 characters.
enterprise-password
Password for the Wi-Fi network. Used for authentication when using wpa-wpa2-enterprise or wpa2-
enterprise security.
Accepted value is any string up to 255 characters.
wifi-client
Wi-Fi client that should join this network
Accepted values can be one of none, 1 or 2. The default value is none.
hidden-network
Wi-Fi network SSID is hidden (not broadcast). Enabling this will add latency to scanning.
Value is either on or off. The default value is off.
To Next Page
Loading...
