Digi TransPort LR54 - Show LAN Ipv6 Status

IPv6 Show LAN IPv6 status
Digi TransPort WR Routers User Guide
70
Web
1. On the menu, click Network > Networks > LANs. The LANs page appears.
2. Select the LAN on which you want to enable IPv6.
3. Open the IPv6 group, and enable IPv6.
Command line
To enable IPv6 on a LAN, use the lan command ipv6-state parameter. For example:
digi.router> lan 1 ipv6-state on
digi.router> save config
Show LAN IPv6 status
You can view IPv6 status and statistics for LANs from either Web UI or the command line.
Web
1. On the menu, click Network > Networks > LANs. All configured LANs appear.
2. Select a LAN. The LAN display expands to show the configuration parameters and the status
and statistics for the interface assigned to the LAN. If IPv6 is enabled for the LAN and IPv6
addresses are assigned to it, the addresses display in the IPv6 Address field.
Command line
To show the IPv6 status on a LAN, use the show lan command. For example:
digi.router> show lan 1
LAN 1 Status and Statistics
---------------------------
Admin Status : Up
Oper Status : Up
Description : Ethernet LAN network
Interfaces : eth2
MTU : 1500
DHCP client : Off
IP Address : 192.168.1.1
Mask : 255.255.255.0
DNS Server(s) : 8.8.8.8
IPv6 Address(es) : fe80::8473:dff:fe69:ab41/64 (Link Local)
2600:1000:b03e:7ae9:1000::1/68 (Global)
Received Sent
--------- ----
Packets 167018 56253
Bytes 13487578 4608476