How to test a WR11 router step by step.
Page | 18
Now Navigate to:
Management - Connections > PPP Connections > PPP 1
Click “Drop Link” and refresh the page by clicking >PPP 1
You may need to wait up to 5 minutes
A valid IP address for SIM 2 should be seen – Notice it is different to the one assigned for SIM 1
If a valid IP address is NOT found, please download the debug.txt and email this to Digi Technical
Support (tech.support@digi.com) or open a case at http://www.digi.com/support/eservice/ for
assistance.
Instructions on how to extract the debug.txt can be found in the following application note:
http://ftp1.digi.com/support/documentation/QN_024_Extracting%20the%20debug.txt%20file%20fro
m%20a%20Digi%20TransPort%20or%20Sarian%20router.pdf
To Next Page
Loading...
