1
Package Contents
Quick Start Guide
TransPort WR11
a
b
c
d
Mounting Tips!
TransPort WR11 Antenna
If any item is missing or damaged, please contact your supplier. Also, make a record of any damage that may have occurred during
shipping and report it to the supplier.
Depending on model and configuration, the package will also contain additional cables/antennas as appropriate.
2 Install SIM Card(s)
f
Power Supply
Power Supply Adapters
(For non-U.S. models only)
Re-attach the SIM cover.
DIGI TRANSPORT WR11
Power
Signal
Service
SIM card(s) should be inserted into SIM sockets as illustrated in the following images.
The Dual SIM feature on the Digi TransPort WR11 provides support for a primary and secondary mobile service provider. The secondary
service can be used as a back-up in the event that the primary service disconnects or starts roaming.
The Digi TransPort WR11 should be positioned on a flat, level surface. The unit is designed for indoor use and should be mounted in a location
with adequate ventilation. Also, do not expose the unit to extremes of heat or cold, strong magnetic fields, or liquids.
B
A
DIGI TRANSPORT WR11
SIM 2
SIM 1
Service
Signal
Power
Insert SIM card(s) as shown in the following
image. If you are only using one SIM card, make
sure you use the SIM 1 slot.
C
DIGI TRANSPORT WR11
Power
Signal
Service
HSPA+ Models
90002198_C
Remove the SIM door. Hold the product on a flat surface and using
a screwdriver, firmly pull the cover straight up.