Digi TransPort WR11 - Page 181

Configuring network interfaces Configure Ethernet interfaces
Digi TransPort® Routers User Guide
181
DNS Server / Secondary DNS Server
The IP address of DNS servers the router uses for resolving IP hostnames.
Note If the IP address, Mask, Gateway, DNS server or Secondary DNS server parameters are
specified manually, but the option to use a DHCP server is later selected, any existing manually
specified parameters will override the DHCP supplied parameters. To change from manual
configuration to DHCP, be sure to remove all manually specified parameters first.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameters
eth n descr Free text field Description
eth n ipaddr Valid IP address IP Address
eth n mask Valid Subnet
Mask
Mask
eth n gateway IP address Gateway
eth n dnsserver IP address DNS Server
eth n secdns IP address Secondary DNS Server
eth n dhcpcli on, off On=Get an IP address automatically
using DHCP
Off=Use the following IP address
eth n ipv6_mode off, wan, lan
Configuration > Network> Interfaces
> IPv6 > ???
eth n ipv6_wan 0, <number of
ipv6_wan
parameter
instances>, 1
Configuration > Network> Interfaces
> IPv6WAN
settings
eth n ipv6_lan 0, <number of
ipv6_wan
parameter
instances>, 1
Configuration > Network> Interfaces
> IPv6WAN
settings
eth n vrf integer VRF
eth n vrfexport integer VRFexport