Digi TransPort WR11 - Page 244

Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
244
Command Instance Parameter Values Equivalent web parameter
modemcc 0 sca Free text field Use this SMS message centre number n
instead of the network default
modemcc 0 sms_
access
0=Super
(default)
1=High
2=Medium
3=Low
4=None
5=HighLow
6=HighMedium
7=CheckPar
SMS access level:
modemcc 0 sms_cmd_
sep
Free text field Use as a command separator (default is CR)
modemcc 0 sms_
callerid
Mobile
telephone
number
Allow CLI commands from the following SMS
numbers.
(First SMS number)
modemcc 0 sms_
callerid_1
to 9
Mobile
telephone
number
Allow CLI commands from the following SMS
numbers.
(additional SMS numbers 1 to 9)
Commands-for SIM Slot 2 (PPP 1)
Command Instance Parameter Values
Equivalent web
parameter
modemcc 0 sms_interval_2 Poll for incoming
SMS messages:-
Every n minutes
modemcc 0 sms_replies_2 on/off Enable command
replies via SMS
modemcc 0 sms_concat_2 Number
0=off
10=default when
enabled
Concatenate replies
modemcc 0 Sca_2 Free text field Use this SMS
message centre
number n instead of
the network default