Configuring IP routing and forwarding Configure static routes
Digi TransPort® Routers User Guide
439
Command Instance Parameter Values
Equivalent
web
parameter
route n dial_int 0-255
Default 10
Do not allow
this interface
to be activated
by this route
for s seconds
after the last
activation
attempt
route n q1 on,off Only queue one
packet whilst
waiting for the
interface to
connect
route n deact_ent Blank,PPP When this route
becomes
available,
deactivate the
following
interfaces x,y
route n deact_add 0-2147483647 When this route
becomes
available,
deactivate the
following
interfaces x,y
route n deact_ent2 Blank,PPP When this route
becomes
available,
deactivate the
following
interfaces x,y
route n deact_add2 0-2147483647 When this route
becomes
available,
deactivate the
following
interfaces x,y
route n unoos_secs 0-2147483647 Keep this route
in service for s
seconds after
OOS state is
cleared
To Next Page
Loading...
