Digi TransPort WR11 - Page 719

Configuring system settings Set system date and time
Digi TransPort® Routers User Guide
719
Command Instance Parameter Values
Equivalent web
parameter
ntp n inhibit_add 0-255 Disable NTP when
interface x,y is out of
service
y=interface number
ntp n server Valid IP address or hostname,
such as ntp1@timeserver.org
NTP Server
ntp n bcast 0, 1 Broadcast Mode
0=disabled
1=enabled
ntp n minpoll 3-14 Poll Interval s1, s2
3=8
4=16
5=32
6=64
7=128
8=256
9=512
10=1024
11=2048
12=4096
13=8192
14=16384
ntp n maxpoll 3-14 Poll Interval s1, s2
See minpoll parameter
for values.
ntp n burstint 0-255 Startup burst Interval s
seconds
ntp n server2 Valid IP address or hostname,
such as ntp2@timeserver.org
NTP Server
ntp n bcast2 0, 1
0=disabled
1=enabled
Broadcast Mode
ntp n minpoll2 3-14 Poll Interval s1, s2
See minpoll parameter for
values.
ntp n maxpoll2 3-14 Poll Interval s1, s2
See minpoll parameter for
values.
ntp n burstint2 0-255 Startup burst Interval s
seconds
ntp n server3 Valid IP address or hostname,
such as ntp3.timeserver.org
NTP Server.