Digi TransPort WR31 - Qdl Command: Select Cellular Image to Load

Use the command-line interface Using the CLI parameter tables in this guide
Digi TransPort WR Routers User Guide 141
qdl command: Select cellular image to load
The qdl command selects which image to load onto a GOBI cellular module. The syntax of the
command is:
qdl 0 fw <n>
where n can be 0-14. The meaning of each value is below. The default value is 0.
Instance Value
0Generic UMTS
1Verizon
2Sprint PCS
3IUSACELL
4 Bell Mobility
5 Alltel
6 Cingular Blue
7Cingular Orange
8T-Mobile
9Docomo
10 Orange
11 Vodafone
12 Telefonica
13 Telital
14 OMH