Configure network interfaces Configure Wi-Fi interfaces
Digi TransPort WR Routers User Guide 186
Rogue Scan parameters
In Rogue Scan mode, the router performs a scan of the Wi-Fi channels and will report what Wi-Fi
Access Points it detects. Use this feature to detect unauthorized Access Points that might be trying
to get unsuspecting Wi-Fi clients to connect them. When an authorized Access Point is detected, an
event log entry is created and an alarm (such as email, SMS, SNMP Trap) can be triggered. It is
possible to configure a list of the MAC addresses of the authorized Access Points that will not be
reported when detected.
MAC Address
The MAC address of an authorized Access Point.
Add button
Adds the authorized Access Point to the list of authorized Access Points.
Perform Rogue Scan button
Performs a scan to detect unauthorized Access Points.
Rogue Scan CLI commands
Entity Instance Parameter Values Equivalent web parameter
macrogue n mac MAC address with
no separators, for
example
112233445566
MAC Address
To Next Page
Loading...
