Configure network interfaces Configure mobile (cellular) interfaces
Digi TransPort WR Routers User Guide 188
Mobile Settings parameters
Select the service plan and connection settings for connecting to the mobile network. The
Configuration > Network > Interfaces > Mobile > Mobile Settings menu options is divided in three
sections.
Mobile Service Provider Settings
Here, you can set the following values:
Use custom APN instead of built-in APN
Selects using a custom Access Point Name (APN) instead of the built-in one.
Custom APN
The name for the custom APN.
SIM PIN
Some SIM cards are locked with a Personal Identification Number (PIN) code to prevent misuse if
they are lost or stolen. The GSM operator should be able to confirm if the SIM requires a PIN
code. If you enter a PIN code in this field, the router will try to unlock the SIM before attempting
to connect to the network.
Confirm SIM PIN
Enter the PIN again in this field to confirm it.
APN
An alternative service APN for use in the event that the router cannot connect using the primary
APN specified by the APN parameter. The router will only use this APN if the primary APN fails
and the Use backup APN parameter is enabled.
Username (Optional)
Some APNs require a username and password for the PPP connection. These are not always pre-
defined such as any made-up username or password will suffice.
Password (Optional)
Enter the password for the PPP connection.
Confirm Password
Enter the password again in this field to confirm it.
To Next Page
Loading...
