Digi TransPort WR31 - Page 220

Configure network interfaces Configure DSL interfaces
Digi TransPort WR Routers User Guide 220
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
ppp 1 description Free text Description
ppp 1 username Free text Username
ppp 1 password Free text Password
ppp 1 do_nat 1 on Enable NAT on this interface
(IP Address)
ppp 1 do_nat 2 on Enable NAT on this interface
(IP Address and port)
ppp 1 natip IP Address NAT Source IP Address
ppp 1 ipsec on, off Enable IPSec on this interface
ppp 1 firewall on, off Enable the firewall on this interface
ppp 1 dlwarnkb Kbytes/Mbytes/
GBytes
Issue a warning event after
ppp 1 dlstopkb Kbytes/Mbytes/
GBytes
Stop data from being transmitted after x
Bytes data
ppp 1 dlrstday 1-28 Reset the data limit on the nth day of the
month