Digi TransPort WR31 - Page 307

Configure network interfaces Configure Advanced interfaces settings: External modems and PPP
Digi TransPort WR Routers User Guide 307
ppp n ipsecent Default
PPP
Ethernet
Use interface x,y for the source address of IPsec
packets
ppp n ipsecadd Valid interface
number
Use interface x,y for the source address of IPsec
packets
ppp n firewall off, on Enable the firewall on this interface
ppp n qos off, on Enable QoS on this interface
ppp n use_modem 0, 1 This PPP interface will use
ppp n cdma_backoff 0, 1
Default: 1
None
ppp n ndis off, on Request packet data connection
ppp nocfg 0, 1, 2, 3 Remote management access
0=No restrictions
1=Disable management
2=Disable return RST
3=Disable management and return RST
ppp n igmp off, on Enable IGMP
ppp n ifspeed 64000 bps None. CLI command only. The ppp command
allows configuring the interface speed for
reporting in SNMP.
ppp n norxrst off, on None
Entity Instance Parameter Values Equivalent web parameter