Digi TransPort WR31 - Page 327

Configure network interfaces Configure Advanced interfaces settings: External modems and PPP
Digi TransPort WR Routers User Guide 327
ppp n l_md5 0-2
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using CHAP-MD5
ppp n r_md5 0, 1
0=Off
1=On
Allow remote unit to authenticate using CHAP-
MD5
ppp n l_ms1 0, 1
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using MS-CHAP
ppp n r_ms1 0, 1
0=On
1=Off
Allow remote unit to authenticate using MS-
CHAP
ppp n l_ms2 0-2
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using MS-
CHAPv2
ppp n r_ms2 0, 1
0=Off
1=On
Allow remote unit to authenticate using MS-
CHAPv2
ppp n lcn 0-4096 LCN
ppp n lcnup 1=up,
0=down
LCN direction
ppp n defpak 16,32,64,128,256,5
12 or 1024
Default X.25 packet size
ppp n cingnua text (valid NUA) Use NUA
ppp n ipmode 0=XOT, 1=raw TCP Use TPAD over interface
ppp n baklcn 1-4095 (Backup) LCN
ppp n baklcnup 1=up, 0=down (Backup) LCN direction
ppp n bakl2iface lapb, lapd, tcp, ssl,
vxn
Use backup interface
ppp n bakl2nb 0-255 Use backup interface
Entity Instance Parameter Values Equivalent web parameter