Digi TransPort WR31 - Page 355

Configure DNS servers and Dynamic DNS Configure DNS Servers
Digi TransPort WR Routers User Guide 355
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
dnsupd 0 server Valid IP address a.b.c.d Send an update to DNS Server a.b.c.d
dnsupd 0 name up to 20 characters Name
dnsupd 0 zone up to 64 characters Zone
dnsupd 0 ifent PPP,ETH when interface x,y becomes active
dnsupd 0 ifadd Valid instance number when interface x,y becomes active
dnsupd 0 upd_int 0 – 2147483648 (seconds) Also send an update every h hrs, m mins s
secs
dnsupd 0 delprevrr off, on The DNS server should delete all previous
records
dnsupd 0 username Valid username (up to 20
characters)
DNS Server Username
dnsupd 0 password Valid password (up to100
characters)
DNS Server Password
dnsupd 0 b64pwd off, on Password is Base64 encoded
dnsupd 0 autozone off, on Local time offset from GMT auto detect
dnsupd 0 tzone –2147483648 -
2147483647 (hours)
Local time offset from GMT n
dnsupd 0 fudge 0 – 2157483648 (seconds) Required Time Accuracy s seconds
dnsupd 0 ttl 0 – 2157483648 (seconds) Allow DNS clients to cache this entry for s
seconds