Configure IP routing and forwarding IP Routing parameters
Digi TransPort WR Routers User Guide 364
IP Routing parameters
Enable CIDR routing
When enabled, the following six text boxes are displayed:
Connected Interfaces
The CIDR metric that the router should apply to connected interfaces.
Static Routes
The CIDR metric that the router should use for static routes. The default is 1.
eBGP Routes
The CIDR metric that the router should use for eBGP routes. The default is 20.
OSPF Routes
The CIDR metric that the router should use for OSPF routes. The default is 110.
RIP Routes
The CIDR metric that the router should use for RIP routing. The default is 120.
To Next Page
Loading...
