Digi TransPort WR31 - Virtual Routing Entry; Multi Protocol BGP Entity

Configure IP routing and forwarding Virtual Routing and Forwarding (VRF)
Digi TransPort WR Routers User Guide 397
Virtual Routing Entry
Multi Protocol BGP Entity
The Multi Protocol BGP Entity object describes the Border Gateway Protocol (BGP) component of a
MPLS-BGP based VPN router. It is bound by its Logical Sons attribute to all Virtual Routing
Forwarding (VRF) Entity objects among which it is routing IP packets.
Attribute name Attribute description Scheme Polling interval
Next Hop BGP Address Next hop Border Gateway Protocol (BGP) IP
address
IPCore Configuration
Incoming and Outgoing Inner
Label
Incoming and outgoing inner MPLS label IPCore Configuration
Outer Label Outer MPLS label IPCore Configuration
Destination IP Subnet Final destination IP subnet IPCore Configuration
Next Hop IP Address Next hop IP address IPCore Configuration
Type Route entry type
(Null, Other, Invalid, Direct, Indirect, Static)
IPCore Configuration
Routing Protocol Type Routing protocol type
(Null, Other, Local, Network Managed, ICMP,
EGP, GGP, Hello, RIP, IS-IS, ES-IS, Cisco IGRP,
BBN, SPF, IGP, OSPF, BGP, EIGRP)
IPCore Configuration
Outgoing Interface Name Outgoing IP interface name IPCore Configuration
Attribute name Attribute description Scheme Polling interval
BGP Identifier Border Gateway Protocol (BGP) identifier IPCore Configuration
Local Autonomous System Local peer autonomous system IPCore Configuration
Cross Virtual Routing Table Array of Equivalent Cross Virtual Routing Entry IPCore Configuration
BGP Neighbors Array of BGP neighbor entries IPCore Configuration
Logical Sons Array of all VRF Entity objects among which
this Multi Protocol BGP Entity is routing IP
packets
IPCore Configuration