Configure Virtual Private Networking (VPN) OpenVPN parameters
Digi TransPort WR Routers User Guide 467
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
ovpn n descr Up to 30 characters Description
ovpn n IPaddr Valid IP address a.b.c.d IP address a.b.c.d
ovpn n dest Valid IP address a.b.c.d Destination host a.b.c.d
ovpn n ll_ent <blank>, PPP, ETH Link socket interface x,y
x= interface type
ovpn n ll_add 0-2147483647 Link socket interface x,y
y= interface number
ovpn n ip_ent <blank>, PPP, ETH Get link socket source address from this
interface x,y
x= interface type
ovpn n ip_add 0-2147483647 Get link socket source address from this
interface x,y
y= interface number
ovpn n mtu 0-2147483647 MTU
ovpn n metric 0-2147483647 Metric
ovpn n do_nat 0, 1, 2
0=Off
1=Address only
2= Address and port
NAT mode
ovpn n ipanon off, on IP analysis
ovpn n firewall off, on Firewall
ovpn n igmp off, on IGMP
ovpn n inrip off, on Include in RIP advertisements
ovpn n autoup off, on Automatically connect interface
ovpn n server off, on Server mode (listener)
ovpn n port 0-65535 Link socket port
ovpn n proto TCP,UDP Link socket protocol
ovpn n tls_auth_key Up to 30 characters TLS auth password
ovpn n etls_auth_key Enciphered version TLS auth password
ovpn n puship Valid subnet a.b.c.d Push IP address #1 a.b.c.d
ovpn n pushmask Valid netmask a.b.c.d Push mask #1 a.b.c.d
ovpn n puship2 Valid subnet a.b.c.d Push IP address #2 a.b.c.d