Digi TransPort WR31 - Page 590

Configure legacy protocols Configure X.25 parameters
Digi TransPort WR Routers User Guide 590
The pre-defined profiles (50, 51, 90, 91), cannot be overwritten and are permanently configured as
shown in the following table:
Stored X.25 PAD profiles are held in non-volatile memory, and are not lost when the router is
switched off. When in the following format, the PROF command loads the stored profile specified by
nn:
prof nn
Parameter Profile
50 51 90 91
11010
20010
3001260
455020
50310
65510
70822
80000
90000
10 0 0 0 0
11 15 15 15 15
12 0 3 1 0
13 0 0 0 0
14 0 0 0 0
15 0 0 0 0
16 8 8 127 127
17 24 24 24 24
18 18 18 18 18
19 2 2 1 1
20 64 64 0 0
21 0 0 0 0
22 0 0 0 0