Configure Remote Management Advanced remote management settings
Digi TransPort WR Routers User Guide 668
Related CLI commands
cloud command
cloudstat command
There is an additional cloud CLI command, cloudstat. Enter this command without parameters to
return the status of the socket connections, such as whether there is a live connection to the
Remote Manager server.
Entity Instance Parameter Values Equivalent web parameter
cloud n idledisconn 0, 1 Disconnect when Remote Manager server
is idle
0=Do not disconnect
1=Disconnect
cloud n disconnsecs 0-28800 Idle Timeout h,m,s
This CLI value is entered in seconds only.
cloud n ppprxkeepalive 0-28800 WAN - Receive Interval seconds.
cloud n ppptxkeepalive 0-28800 WAN - Transmit Interval seconds.
cloud n pppwaitfor 1-255 WAN - Assume connection is lost after n
timeouts.
cloud n ethrxkeepalive 0-28800 Ethernet - Receive Interval seconds.
cloud n ethtxkeepalive 0-28800 Ethernet - Transmit Interval seconds.
cloud n ethwaitfor 1-255 Ethernet - Assume connection is lost after
n timeouts.
To Next Page
Loading...
