Digi TransPort WR31 - Page 834

Device administration Manage files
Digi TransPort WR Routers User Guide 823
Example 2:
To copy a file named image from the main flash memory onto the USB device, enter the command:
copy image u:image
To copy a file named Logcodes.TXT from the USB device to the main flash memory, enter the
command:
copy u:Logcodes.TXT Logcodes.TXT
or
copy u:Logcodes.TXT
If no destination file is specified, the destination is set to the FLASH directory and the file name
remains the same.
Use a USB devices to upgrade firmware
The following functionality is available from firmware version 4891 onwards.
The TransPort firmware can be upgraded using the USB storage device. To perform an upgrade:
1 Create a simple batch file named pb2.bat
2 Place the relevant firmware upgrade files into the root directory of the USB storage device.
3 Insert the USB device into the TransPort router.
4 Press the reset button twice. The firmware upgrade will begin. You will see output similar to the
following:
ERROR_EXIT
del *.web
copy u:sbios1 sbios1
copy u:logcodes.txt logcodes.txt
copy u:image image
copy u:image4.c3 image4.c3
copy u:Y4890wVS.web Y4890wVS.web
move sbios1 sbios
scanr
flashleds
5 When the LEDs on the TransPort start flashing, the upgrade is complete.
6 Reboot the TransPort router to activate the new firmware.