Digi TransPort WR41 - Page 228

Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
228
Note If the firewall is enabled on an interface and with the absence of any firewall rules, the
default action is to block ALL traffic.
6. Click Apply.
Command line
Configure mobile service provider settings commands for SIM 1 (PPP 1)
Command Instance Parameter Values Equivalent web parameter
modemcc 0 apn Free text field Service Plan / APN:
modemcc 0 usebuapn on/off Checkbox (Use Backup APN)
modemcc 0 buapn Free text field Use backup APN
modemcc 0 pin SIM PIN
number
SIM PIN:/Confirm SIM PIN
ppp 1 username Free text field Username:
ppp 1 password Free text field Password:/Confirm Password
Configure mobile service provider settings commands for SIM 2 (PPP 1)
Command Instance Parameter Values Equivalent web parameter
modemcc 0 Apn_2 Free text field Service Plan / APN:
modemcc 0 Usebuapn_2 on/off Checkbox (Use Backup APN)
modemcc 0 Buapn_2 Free text field Use backup APN
modemcc 0 Pin_2 SIM PIN
number
SIM PIN:/Confirm SIM PIN
ppp 1 username Free text field Username:
ppp 1 password Free text field Password:/Confirm Password
Configure mobile connection settings
Command Instance Parameter Values Equivalent web parameter
ppp n rxtimeout off, on Re-establish connection when no data is
received for a period of time.
ppp 1 rxtimeout 0-86400
(seconds)
Inactivity Timeout: h hrs m mins s seconds