Digi TransPort WR44 - Page 615

Configuring legacy protocols Configure X.25 parameters
Digi TransPort® Routers User Guide
615
Command line
Command Instance Parameter Values Equivalent web parameter
x25gen 0 lapd_cnf_
addr
1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet.
LAPD setting
x25gen 0 lapd_cnf_
addr
1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet
LAPB setting
x25gen 0 xot_cnf_
addr
1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet
XoT setting
x25gen 0 reset_
xotpvc_ini
1=enabled
0=disabled
Reset XOT PVC if the router is the Initiator
x25gen 0 reset_
xotpvc_
resp
1=enabled
0=disabled
Reset XOT PVC if the router is the Responder
x25gen 0 en_incl_
iphdr
1=enabled
0=disabled
Include length of header in IP length header