Digi TransPort WR44 - Page 726

Configuring system settings Set miscellaneous system options
Digi TransPort® Routers User Guide
726
SNMP Enterprise Name
The name corresponding to the above Enterprise Number.
Only resolve DNS request for domain
Entering a domain name here restricts DNS requests to the specified domain only.
W-WAN LED to display W-WAN, ISDN/PSTN
On the front panel of the display of models fitted with a W-WAN module, is an LED that you can
use to display the status of the W-WAN module or the status of the PSTN/ISDN connection. Use
the drop-down selection box to choose what the LED displays. The ISDN/PSTN settings depend
upon which of these two options are available on the router.
Serial LED to display Connection, DTR
On the front panel of the router is an LED dedicated to indicating the status of various signals
on the asynchronous serial line. Use the drop-down selection box to choose which signal status
to display. On modules fitted with W-WAN, this LED has additional functionality, you can use this
LED to display the W-WAN signal strength.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
config n powerup 0, 1 Use Config n when the router
powers up
cmd n anonftp 0, 1
0=Off (default)
1=On
Allow anonymous FTP login
snmp n ftpnatport 0-65535 Additional FTP NAT port
snmp n ent_nb 0-65535 SNMP Enterprise Number
Default 16378
cmd n ent_name Free text field SNMP Enterprise Name
cmd n dnsname Valid Domain name, such as
mydomain.org
Only resolve DNS request for
domain
cmd n gprsled_
mode
0, 1 W-WAN LED to display W-WAN,
ISDN/PSTN
0=W-WAN
1=ISDN/PSTN
cmd n asyled_
mode
0, 1 Serial LED to display
Connection, DTR
0=Connection
1=DTR status
2=W-WAN signal strength