Configure Wi-Fi interfaces
Digi TransPort User Guide 182
Wi-Fi Filtering
You can restrict access to the router via Wi-Fi. When the filtering is enabled, only MAC addresses
configured in the table will be allowed to connect to the router.
Enable Wi-Fi filtering
Enable Wi-Fi filtering so that only clients who have their Wi-Fi MAC address configured in the
MAC address table will be allowed to connect.
MAC Address
MAC addresses of Wi-Fi client that you wish to allow access to.
A valid MAC address has the format: 11:22:33:44:55:66. When entering this parameter, omit
the : separators. For example, 112233445566.
Note Carefully review settings before applying changes. Incorrect settings can make the
TransPort device inaccessible from the Wi-Fi network.
Wi-Fi Filtering CLI Commands
Entity Instance Parameter Values Equivalent Web Parameter
wifi 0 macfilter on/off Enable Wi-Fi filtering
wififilt n mac MAC address with
no separators,
such as
112233445566
MAC Address
To Next Page
Loading...
