Digi TransPort - Page 184

Configure Wi-Fi interfaces
Digi TransPort User Guide 184
Hide SSID
When enabled, the SSID is not included in the beacon messages transmitted by the Wi-Fi
interface when in Access Point mode. This means that Wi-Fi clients will not be able to auto-
detect the Access Point.
Isolation
When enabled, connected Wi-Fi clients is unable to communicate with other Wi-Fi clients or
Ethernet hosts connected to this AP.
Wi-Fi CLI Commands
Entity Instance Parameter Values Equivalent Web Parameter
wifinode 0 enabled on, off Enable this Wi-Fi interface
wifinode 0 descr String Description
wifinode 0 ssid String up to
32
characters
SSID
wifinode 0 mode ap, client,
rogue
Mode
wifinode o bridge_inst 0-3 This Wi-Fi interface is a member of
Bridge instance n and therefore
bridged to the following interfaces
eth n bridge_inst 0-3 Interface
eth n wificli on, off Link this Wi-Fi client interface with
Ethernet n
eth n wificli_add Integer Link this Wi-Fi client interface with
Ethernet n
wifinode 0 broadcastssid on, off Hide SSID
wifinode 0 isolation on, off Enable station isolation